Jaguar VOICE ACTIVATION X-TYPE 2001.5 - Manual (Page 27)

24 Voice activation
Voice command descriptions (continued)
Navigation commands (continued)
• [NAVIGATION] (VOICE GUIDANCE ON/MUTE OFF)
Turns on the spoken guidance from the navigation system.
• [NAVIGATION] (VOICE GUIDANCE OFF/MUTE ON)
Turns off the spoken guidance from the navigation system.
• [NAVIGATION] REPEAT [LAST] INSTRUCTION
The navigation system will repeat the last spoken guidance
instruction.
• [NAVIGATION] [SELECT] ZOOM LEVEL zoom level 1-13
Adjusts the map display to the zoom level given in the
command. Zoom level 1 represents maximum
magnification.
• [NAVIGATION] ZOOM IN zoom increment level 1-12
Adjusts the map display to zoom in the number of levels
given in the command.
• [NAVIGATION] ZOOM OUT zoom increment level 1-12
Adjusts the map display to zoom out the number of levels
given in the command.
• [NAVIGATION] CLEAR ROUTE
Clears the route currently set in the navigation system. The
user will be asked to confirm the command before the route
is cleared.
• [NAVIGATION] SHOW TURN LIST
Displays details of the next three turns for the route
currently set in the navigation system.
• NAVIGATION STORE NAME
Stores the currently selected location, see below, with a
nametag, in the voice system memory. After each prompt
press and release the voice button, wait until the end of the
beep, then speak. If the nametag given sounds too similar to
a navigation nametag already stored or the word "directory"
the system will not accept the nametag. A total of 20
navigation nametags can be stored.
If the navigation display screen is showing a map, the centre
of the map will be stored as a memory point with the chosen
nametag. If the navigation display screen is displaying the
details of a memory point already stored in the navigation
system the chosen nametag will be added to the existing
stored location. If the display is showing any other screen,
the current position will be stored as a new location in the
navigation system with the chosen nametag.