Using the remote control unit, Remote sensor, Preparations – JVC XV-N44SL User Manual

Page 9

Advertising
background image

Preparations

7

XV-N44SL/GNT0032-001A/English

Preparations

Using the remote control unit

To install batteries

Open the compartment cover, and place the two supplied R6P
(SUM-3)/AA(15F) batteries in the remote control unit according to
the polarity markings (“+” and “–”) inside the compartment. Then
replace the cover.

The batteries will last about six months with normal use.
If the functions of the remote control unit become erratic, replace
the batteries.

Precautions of the safe use of batteries

Observe the following precautions for the safe use of batteries. If
they are used improperly their lives will be shortened, they may
burst or their contents may leak.
• Remove the batteries from the remote control unit if it is not

going to be used for a long period of time.

• Remove dead batteries and dispose of them properly.
• Never leave dead batteries lying around, take them apart, mix

them with other refuse, or throw them into an incinerator.

• Never touch liquid that has leaked out of a battery.
• Do not mix new and old batteries, or batteries of different types,

when replacing them.

Remote sensor

Point the top of the remote control unit toward the remote sensor
as directly as possible. If you operate it from a diagonal position,
the operating range (approx. 5 m) may be shorter.

Remote sensor

XV-N44SLL(UJ).book Page 7 Monday, March 3, 2003 6:03 PM

Advertising