JVC SP-THA25 - Manual (Page 12)

8
Getting Started
Connecting Audio/Video Component
Turn the power off to all components before connections.
You can connect TV with either the composite video cord ( A ) or
the SCART cable ( B ).
For using the SCART cable ( B )
Turn off the power of the system and your TV before setting RGB/
COMPOSITE selector.
• If RGB input is equipped for your TV, set RGB/COMPOSITE
selector on the rear panel to “RGB.” You can get a better picture
quality by using RGB out setting.
• If RGB input is not equipped for your TV, set RGB/COMPOSITE
selector to “COMPOSITE.”
Notes:
The AV OUT on this unit is not compatible with the S-VIDEO signal.
COMPOSITE
RGB
COMPOSITE
RGB
Video cord (supplied) SCART cable (not supplied)
TV connection
The SCART cable is not supplied with this system.
Use the cable supplied with the other component or purchase one at an electric appliance store.
Notes:
The SCART terminal on the rear panel is indicated as “AV OUT.” However, this terminal is designed as video output. So, no audio signals are
emitted through this terminal.
A B
COMPOSITE
RGB
L
R
REAR
AUDIO IN
DIGITAL IN
OPTICAL
AUX
1
REAR
MIN 6
TV
A
COMPOSITE
RGB
B
RGB/COMPOSITE
selector
01_09_TH_A25[B].p65 03.7.28, 8:05 PM 8