Jwin JX-CD915 - Manual (Page 2)

— 2 — — 3 — — 4 —
ENGLISH
LOCATION OF CONTROLS
1. SKIP / SEARCH DOWN
2. PLAY / PAUSE (POWER ON)
3. LCD DISPLAY
4. ASP / DIR. UP
5. SKIP / SEARCH UP
6. MODE / PROG
7. STOP / (POWER OFF)
8. OPEN KNOB
9. EQ
10. DC JACK
11. HOLD SWITCH
12. BATTERY DOOR
13. TUNING KNOB
14. FUNCTION SWITCH
15. HEADPHONE JACK
16. VOLUME
17. BASS BOOST SWITCH
CAUTION
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
THIS SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED
SERVICE PERSONNEL.
IMPORTANT : Since movement of the CD mechanism and the sensitive circuitry may
cause interference to the radio tuner nearby, switch this unit off while operating
other radio devices.
3 2
14
9 8 7 6
1 5 4
15
13
12
11
10
16
17
Various Playing Modes
MODE Button — There are 3 kind of function :
A. Repeat Play
During PLAY mode
•
Press the MODE/PROG button once to play single track repeatedly.
• The repeat indicator will appear in the display.
During PLAY mode
•
Press the MODE/PROG button twice (Three times in MP3 disc) to play the entire disc
repeatedly.
• The repeat indicator will appear in the display.
• Press the MODE button twice in MP3 disc to play the directory repeatedly.
• The repeat indicator DIR will appear in the display.
NOTE - To cancel REPEAT simply press the MODE/PROG button until the repeat indicator
disappears.
B. Random Play
DURING PLAY mode
•
Press the MODE/PROG button 3 times. (4 times in MP3 disc)
• The SHUF indicator will appear in the display.
• Press the PLAY button, all the tracks on a disc to be played in a random sequence.
NOTE - To cancel RANDOM PLAY simply press the MODE/PROG button until the SHUF
indicator disappears.
C. Intro Scan
DURING PLAY mode
•
Press the MODE/PROG button 4 times. (5 times in MP3 disc)
• The INTRO indicator will appear in the display.
• Press the PLAY button to play the first 10 seconds of each track on the disc.
NOTE - To cancel INTRO SCAN simply press the MODE/PROG button until the INTRO
indicator disappears.
PROGRAM PLAY (FOR CD DISC)
1. In stop mode, press the MODE/PROG button to make program memory.
2. “ PGM 0P -01” will be displayed, “0” means track number to memory and “P-01”
means program number.
* “0” flashing appears on the display.
3. Press or button to select the desired track.
4. Press the MODE/PROG button to enter the track into memory, the program numbers
which will be increment one step.
* The program no. “P-01” has become “P-02” on the display.
5. Repeat step 3 and 4 until memory is full.
6. Press
button to start the program play.
7. To stop the program play, press the STOP button.
8. For program play in step “ 7 ” , press the MODE/PROG button &
button.
9. To erase the program memory, TURN off the power or open the door.
PREPARATIONS BEFORE USING
Battery Installation
1. Open Battery Compartment cover.
2. Insert 2 batteries (LR6, “AA” size, or equivalent)
in the correct polarity as indicated.
(Heavy duty batteries are recommended.)
3. Close the cover properly.
AC Power Adaptor
1. Plug the DC output of the adaptor to the DC Jack.
2. Connect the adaptor (4.5V/600mA) to a power outlet.
Make sure the voltage is compatible.
DISC PLAYING
This CD player is designed to play the 8cm and 12cm compact disc without using adaptor.
Hold Switch
Set the HOLD button to “ON” position, all the buttons will be locked. Before operation, be
sure to set the switch to “OFF” position, for normal operation.
Getting Start
1. Insert the headphone/earphone plug to PHONE JACK.
2. Set the FUNCTION SWITCH to CD position, Push the OPEN button to right side, and
then the door open, put a disc into the CD compartment with label side upward.
3. Push the disc gently around the centre area until it clicks so that the disc fits into the pivot.
(To remove the disc : Pick up the disc, holding the edge, while pressing the pivot gently.)
4. Close the door and press the PLAY/PAUSE button once.
5. The Display will show the total number of tracks of the disc and total playing time, then
begin to play the first track.
General Operation
Play/Pause Button — Press once to start playback in the original order.
Press again to stop the disc play temporarily.
Stop Button — Press once to stop playback.
Press again to turn off power
Skip / Search Buttons — Press once to skip to next track or
back to previous track .
— Press continuiously to search forward
or backward .
ASP / Directory UP Button — ASP ON / OFF (For CD Disc).
— Directory UP (For MP3 Disc).