JVC LST1083-001C - Manual (Page 18)

Connecting a Video Deck
or Other Equipment
Connecting a video camera
m
Connecting via the i.LINK terminal
.
OPEN/
CLOSE STANDBY/ON
HDV/DV IN
STOP REW PLAY PAUSE REC FF
SD REC HDD REC BV
ONE TOUCH DUBBING REC MODE RESET INPUT SELECT HDD MIDIA SELECT BD/SD
HDV/DV IN
SD REC HDD REC BV
ONE TOUCH DUBBING REC MODE RESET INPUT SELECT HDD MIDIA SELECT BD/SD
m
Connecting via the USB terminal
.
OPEN/
CLOSE
STANDBY/ON
HDV/DV IN
STOP REW PLAY PAUSE REC FF
SD REC HDD REC BV
ONE TOUCH DUBBING REC MODE RESET INPUT SELECT HDD MIDIA SELECT BD/SD
HDV/DV IN
SD REC HDD REC BV
ONE TOUCH DUBBING REC MODE RESET INPUT SELECT HDD MIDIA SELECT BD/SD
Memo:
v
Some video camera models may require an AC adapter
instead of batteries to run. For details, refer to the video
camera’s instruction manual.
Connecting a video deck or other
equipment (recording using this unit)
.
Memo:
v
When connecting using an S-video cable, change the
setting of “VIDEO INPUT SETTING” to “S-VIDEO”.
For more details, refer to
“VIDEO INPUT SETTING” (A page 81) .
v
To record video images played back on this unit to an
external device (video deck, etc.), connect the output
terminal of this unit to the input terminal of the external
device.
Connecting an Amplifier
Connecting an audio amplifier
m
Connecting using an optical digital cable
.
Memo:
v
Remove the protection cap of the cable before connecting.
Store the protection cap properly to prevent it from being
misplaced.
m
Connecting using an audio cable
.
Preparation
18