Imports data from the beginning, Dubbing/importing, Preparations – JVC LST1083-001C User Manual

Page 37

Advertising
background image

Importing Data from an

i.LINK-compatible Device to

the HDD

Data on devices connected to the i.LINK terminal can be
imported to the HDD as follows.

v

Video formats that can be imported:
DV and HDV content

Memo:

v

Only titles that are not copyright-protected can be imported.

v

Devices that have in-built copyright protection such as D-VHS and digital

tuners cannot be connected. This unit only allows import from tape media.

v

Importing will not be performed if no tape has been inserted

into the HDV/DV camera.

v

Importing will be cancelled when the mode is changed from

HDV to DV or vice versa.

v

For camcorders that support both HDV and DV recording, use

only one of the modes for recording and playback.

v

There is no support for editing using a connected PC.

v

Only one i.LINK device can be connected to this unit at a time.

v

When importing DV contents with shooting date/time

information, the date/time information at the beginning of the

contents will be taken as the shooting date/time information.

For HDV contents or DV contents without shooting date/time

information, the importing date/time will be taken as the

shooting date/time information.

Note:

v

Turn off the power for this unit and the connecting device

when connecting using an i.LINK compatible device.

v

Do not unplug the i.LINK cable while importing to the HDD is in progress.

Doing so may result in loss or damage of the titles.

v

For example, during full import of HDV content from JVC GY-

HD100 via i.LINK connection, the beginning of the image may

not be captured if GY-HD100 is not set as follows.

(1) Set the [IEEE1394] switch at the rear of the GY-HD100

unit to [HDV] or [DV] according to the recorded content.

(2) Set [MENU]/[VIDEO FORMAT]/[PB TAPE] on the GY-

HD100 unit to [HDV] or [DV].

(As with (1), set according to the recorded content. Setting to

[AUTO] is not allowed.)

(3) Check to ensure that the [HDV] or [DV] lamp on the side of

the GY-HD100 unit is lit.

(Check to ensure that the lamp that is lit corresponds to the

setting in (1) and (2).)

When importing from a tape that contains data captured in the

HDV recording and DV recording modes, change the video

camera setting according to each recording mode, check to

ensure that the corresponding lamp in (3) is lit, and choose to

start import from the current position.

m

Preparations

1 Connect the device (camera, etc.) to this unit

using an i.LINK cable

.

OPEN/
CLOSE

STANDBY/ON

HDV/DV IN

STOP

REW

PLAY

PAUSE

REC

FF

SD

REC

HDD

REC

BV

ONE TOUCH

DUBBING

REC
MODE

RESET

INPUT
SELECT

HDD

MIDIA SELECT

BD/SD

HDV/DV IN

SD

REC

HDD

REC

BV

ONE TOUCH

DUBBING

REC

MODE

RESET

INPUT

SELECT

HDD

MIDIA SELECT

BD/SD

Memo:

v

After the device (camera, etc.) has been connected using
an i.Link cable, turn on the power of the device and switch
it to playback mode. (refer to the device's (camera, etc.)
instruction manual for more details.)

v

“HDV/DV RDY” appears on the display window of the unit
when an iLINK device is recognized.

2 Press the [DUBBING] button on the remote

control unit

v

The importing screen appears.

.

75$

5&

&+5%

*&8&8

&+5%

&+5%

&+5%

&+5%5&

126+10

1-

4'6740

':+6

5'.'%6

&7$$+0)

56'2

5'.'%6+/2146&7$$+0)

*&&

*&&

*&&

*&&

61*&&

61&8&

&+5%%12;

%#0%'.

0':6

&7$$+0)

8+&'1

2+%674'

3 Select “HDV/DVhHDD” in the importing screen,

and press the [OK] button

v

A check mark is added to the “HDV/DVhHDD” item.

4 Select “NEXT”, and press the [OK] button

v

The import selection screen appears.

Imports data from the beginning

You can import videos from the beginning till the end as
follows. If the current position is halfway through the tape,
import after rewinding the tape to the beginning.

1 Select “IMPORT FROM BEGINNING”, and press

the [OK] button

v

A check mark is added to the “IMPORT FROM
BEGINNING” item.

2 Select “NEXT”, and press the [OK] button

.

*&8&8

126+10

1-

4'6740

':+6

5'.'%6

&7$$+0)

56'2

5'.'%66*'/'6*1&1(+/2146

+/2146(41/$')+00+0)

+/2146(41/%744'06215+6+10

%#0%'.

$#%-

*&&

&7$$+0)

0':6

v

A recording mode selection screen appears.

3 Select “RECORDING MODE”, press the [OK]

button, and select from the pop-up menu

Dubbing/Importing

37

Advertising
This manual is related to the following products: