JVC WB-1550 - Manual (Page 5)

5
System Example
VN-C625 and VN-C655 Systems
CAUTION:
T1: Not in use on this system. Ensure to bind both ends of cables that are not in use with insulating tape.
T2: Power will not be supplied to this unit and the installed camera when the fuse on the main board burns out. When this
occurs, please consult your nearby JVC dealer as exchange of fuse according to the rating (125 V - 5 A) will be required.
TK-C625, TK-C655 and TK-C676 Systems
TO CAMERA
TB1
AC24V
~
INPUT
LED1
LAN
WB-1540 / WB-1550
WB-1540 / WB-1550 (Main Board)
To TB1
Fuse T
VN-C625/655
Supplied Converter
Unit
Ceiling Mount of Network Camera
To [VIDEO OUT] Terminal
To [ALARM IN/OUT] Terminal
To [10 BASE-T/100 BASE-TX] Terminal
Power Cable
(AC 24V)
AC 24 V Power Supply
Coaxial Cable
Monitor
Alarm Cable
Alarm Device
LAN Cable
PC
Power Indicator
Red light turns on during power supply.
Power Cable (DC 12V)
Not in use on this system. (T1)
T1
(Connected)
To [POWER INPUT DC 18 V]
Terminal (VN-C655)
To [POWER INPUT DC 12 V]
Terminal (VN-C625)
SETUP
MENU SET
SPEED
IRIS
AF FOCUS
ZOOM
OPEN
FAR
TELE CLEAR /HOME
7
4
1
8
0
5
2
9
6
3
ENTER
AUTO PAN
OPTION 1 OPTION 2
CAMERA POSI- TION
AUTO PATROL
CLOSE
NEAR
WIDE
AUTO F-1 F-2 F-3
PAN/TILT LENS CAMERA/POSITION
CAMERA POSITION
REMOTE CONTROL UNIT RM-P2580
ALARM
POWER
KEY LOCK
TO CAMERA
LED1
TB1
AC24V
~
INPUT
WB-1540 / WB-1550
WB-1540 / WB-1550 (Main Board)
To TB1
Fuse T
To [VIDEO OUT/TO CCU] Terminal
To [CONTROL/ALARM IN, OUT] Terminal
To Insulated AC 24 V Power Supply
Not in use on this system. (T1)
Coaxial Cable
Communication Cable
VIDEO INPUT
TO CAMERA
RM-P2580
Power Indicator
Red light turns on during power supply.
T1
(Connected)
LAN Cable Power Cable (AC 24 V)
Ceiling Mount of Combination Camera
Power Cable (DC 12 V)
To [POWER INPUT
AC 24 V ~] Terminal
CAUTION:
● Ensure to turn of the power of devices in use before connecting.
● Refer to the instruction manual for the combination camera that is supplied with this unit as well during connection and installation.
T 1: Not in use on this system. Ensure to bind both ends of cables that are not in use with insulating tape.
T 2: Power will not be supplied to this unit and the installed camera when the fuse on the main board burns out. When this
occurs, please consult your nearby JVC dealer as exchange of fuse according to the rating (125 V - 5 A) will be required.