JVC SR MV45U - Manual (Page 64)

Filename [SR-MV45_55U_11Subsidiary.fm]
Masterpage:Left+
64
EN
Page 64 January 10, 2007 1:18 pm
SUBSIDIARY SETTINGS
Cancel The Finalization Of A DVD-RW Disc
1
Load a DVD-RW disc to cancel the disc finalization, and perform
steps 2 to 4 of “Finalize A DVD-R/RW Disc” ( ੬ pg. 63) before
continuing.
2
Press rt to select “CANCEL
DISC FINALIZATION”, then press
ENTER.
3
Press w e to select “OK”, then
press ENTER when “CANCEL
DISC FINALIZATION” appears on
the TV screen.
4
Press SET UP to return to the
normal screen.
● When the disc finalization is cancelled, the mode in which the disc
was formatted is restored, making the disc recordable. (
੬ pg. 7, 62)
Direct Access To “FINALIZE” Setting
When you wish to finalize or cancel the finalization of a disc,
besides accessing the “FINALIZE” setting through the SET UP
button, you can also use the FINALIZE button on the remote
control. This FINALIZE button enables you to access the
“FINALIZE” setting directly after loading the disc.
To finalize a disc
A Load the disc.
B Press DVD so that the DVD lamp lights up on the unit.
C Press FINALIZE to access the “FINALIZE” setting.
● The screen in step 6 of “Finalize A DVD-R/RW Disc” ( ੬ pg. 63)
appears.
D Perform steps 6 to 8 of “Finalize A DVD-R/RW Disc” (੬ pg. 63)
to finalize the disc.
To cancel finalization
A Perform steps A to C of “To finalize a disc” above.
● The screen in step 2 of “Cancel The Finalization Of A DVD-RW Disc”
on the left column appears.
B Perform steps 2 to 4 of “Cancel The Finalization Of A DVD-RW
Disc” on the left column to cancel finalization of the disc.
NOTES:
● The direct access (FINALIZE) function works only when in the DVD
deck mode, on the condition that the Main Menu or Library Database
DVD Navi screen is not displayed.
● The direct access (FINALIZE) function will not work in the following
cases, and an operation prohibition mark “ ” appears on the TV
screen.
● During DVD recording or playback.
● Disc is not loaded.
● A playback-only disc is loaded.
● A DVD-RAM or DVD VIDEO disc is loaded.
● Disc reading in progress.
● Disc information acquisition failure when DVD-RAM is loaded.
● When this unit is in the VCR deck mode or when dubbing is in
progress, the direct access (FINALIZE) function will also not work.
However, “
” will not be displayed.
SR-MV45_55US.book Page 64 Wednesday, January 10, 2007 1:18 PM