JVC XL-R910SL - Manual (Page 13)

10
English To modify the program
While confirming, you can change the track numbers in the
program.
Example: To change the track number (from “18” to “6”)
programed in program step 4
1 Press PROGRAM repeatedly until the contents of program
step 4 appears on the display.
2 Press ¢ / ¡ (or 4 / 1) to select a new track number,
then press PROGRAM again.
• If you want to erase the track from your program, press
CLEAR. (In this case, you can see no change on display.)
To add tracks in the program before playing, press PROGRAM
repeatedly until the unit enters program play mode.
(“– –” under the TRACK indicator will start flashing on the display),
then select the track numbers by following step 3 of the
programming procedure (on the previous page).
Playing at Random — Random Play
The tracks will play at random.
1
Load a disc.
• If the unit is in program play mode (the PROGRAM indicator
is lit on the display), you cannot go to the next step. If this
happens, press
7 to exit from program play mode.
2
Press RANDOM so that the unit enters random
mode.
The RANDOM indicator lights up on the
display.
The tracks are played at random.
Random play ends when all the tracks are played once.
To skip the currently playing track, press ¢ / ¡
(or
4 / 1).
• You cannot go back to the previous tracks during random play
even if you press 4 / 1.
To stop playing, press 7.
• Random play mode is also canceled when you press 0.
To exit from random play mode, press RANDOM again.
• Each time you press the button, random playback mode turns on
and off.
Notes:
• You can turn on random playback mode during normal play.
• You cannot repeat random play. If you press REPEAT during
random play, random playback mode is canceled and normal play
resumes.
RANDOM
PROGRAM
EN07-10.XL-R910[C]_f 01.3.13, 5:42 PM 10