JVC XL-R910SL - Manual (Page 16)

13
English
Other Recording Functions
Synchronized Digital Recording
You can use the synchronized recording method when recording
through the Digital Optical Input terminal.
With this recording method, recording automatically starts when
digital signal comes into this unit, and stops automatically when
signal stops coming in.
• One-track recording: You can record one track at a time. By
using this one-track recording, you can record only your favorite
songs on one disc.
• All-track recording: You can record all the tracks at once.
1
Load a recordable disc and prepare the playback
source.
• See page 12 for details.
• If you want to use automatic tracking, see “Using Automatic
Tracking while Recording” on page 11.
2
Press REC SOURCE to select the Digital Optical
Input as the recording source (the OPTICAL
indicator lights up).
• Each time you press the button, the recording source alternates
between “ANALOG” and “OPTICAL.”
3
Press DIGITAL SYNCHRO repeatedly to select
either one-track recording or all-track recording.
• Each time you press DIGITAL SYNCHRO , the display
changes to show as follows.
ONE ? : Select this to record only one track.
ALL ? : Select this to record all the tracks.
4
Press SET.
5
Start playback on the playback component.
As soon as signals come into this unit, recording starts on this
unit.
• If you have selected one-track recording, recording will end
when one track is played back. You can continue recording
other tracks simply by repeating steps 3 to 5.
To stop any time during recording, press
7.
“BUSY” appears when writing the signals on the disc.
Notes:
• If the PROHIBIT indicator lights up when you start playback, you
cannot make a recording since duplication of the disc played back
is prohibited by SCMS. (See page 15.)
• If you are to play the disc on another CD player compatible with
CD-R/CD-RW, you need to finalize the disc, see “Finalizing a Disc
— CD-R/CD-RW” on page 14.
Remote
NOT
REC
SOURCE
DIGITAL
SYNCHRO ONE ? ALL ?
Canceled
SET
COMPACT DISC RECORDER PROGRAM SET CLEAR
REPEAT
_ON/ —OFF
POWER
RANDOM
AUTO TRACK
DISPLAY
REC PAUSE REC
REC LEVEL
MIN MAX
FINALIZE
ERASE REC SOURCE DIGITAL SYNCHRO
XL-R910
POWER = _ ON
_ON/ —OFF
POWER
7
DIGITAL
SYNCHRO
FINALIZE
REC
SOURCE
ERASE
SET
REC
PAUSE
EN11-14.XL-R910[C]_f 01.3.13, 5:41 PM 13