Jet Tools JJ-6CSDX - Manual (Page 7)

7
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for\ Models JJ-6CSX and JJ-6CSDX Jointers. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
Specifications
Model JJ-6CSX JJ-6CSDX
Stock Number – Bed and Stand Kit ................................ 708457K .............................................708457DXK
Stock Number – Bed Assembly ....................................... 708457J ............................................. 708457DXJ
Stock Number Stand ....................................................... 708457S .............................................708457DXS
Cutting Capacity................................................. 6-1/16"W x 1/2"D .................................... 6-1/16"W x 1/2"D
Cutterhead Speed .........................................................4800 RPM ............................................... 6000 RPM
Number of Knives.........................................................................3 .............................................................. 3
Rabbeting Capacity..................................................................1/2" ..........................................................1/2"
Rabbet Ledge.......................................................... 3-1/8" x 8-3/4" ......................................... 3-1/8" x 8-3/4"
Table Surface.................................7-1/4"W x 45-3/4"L x 31-1/4"H ...................... 7-1/4"W x 56"L x 31-1/4"H
Fence ............................................................... 3-7/8"H x 29-1/8"L ...................................3-7/8"H x 32-3/4"L
Blade Size ....................................................6-1/16" x 5/8" x 1/8"T ............................ 6-1/16" x 3/4" x 5/64"T
Fence Tilts Right .......................................................................45º ...........................................................45º
Positive Stops ................................................................... 45º, 90º ................................................... 45º, 90º
Motor
........................................................... 115/230V, 60Hz, 1HP, 1Ph .....................115/230V, 60Hz, 1HP, 1Ph
............................................................................... Prewired 115V ........................................ Prewired 115V
Net Weight (approx.) ......................................................... 215 lbs. .................................................... 237 lbs
Shipping Weight ............................................................... 230 lbs. .................................................... 258 lbs
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.