JVC LCT0614-001A-H - Manual (Page 14)

NOTE:
14 Plug In Menu
VCR PLUS+ codes for individual television programs can be found in most local newspaper television listings and in
TV magazines.
VCR Plus+ Guide Setup
Using VCR Plus+ codes to program your VCR,
recording your favorite TV programs is now
simple. Whenever you want to record a program,
all you need to do is find its VCR PLUS+ code.
After entering the VCR PLUS+ code, the TV/VCR
Combo will automatically record the program at
the correct date, time, and channel.
• VCR PLUS+ codes for individual television
programs can be found in most local newspaper
television listings and in TV magazines.
Before using VCR PLUS+ for the first time, you
need to enter guide numbers for your local TV
channels. These guide numbers may be found in
your local TV magazine or newspaper’s TV
listings.
Press the M
ENU
button
To SET VCR PLUS+ GUIDE CHANNEL
To display the SET VCR PLUS+ GUIDE
CHANNEL menu
VCR PLUS+ Guide Setup (continued)
Below is the VCR PLUS+ Guide Setup Menu
To set the guide numbers on the menu, select a
guide channel (GUIDE CH) you wish to program.
Find the television channel which matches that
guide channel and program it in the TV Channel
column (TV CH).
To move to a TV CH position that matches
a particular GUIDE CH number
To select the TV CH number
When finished to move to the next GUIDE
CH number
Repeat the steps described above until all
receivable channels have been set
E
XIT
to save the settings and exit
Your TV/VCR Combo is now ready to accept VCR
Plus+ codes for programming.