JVC LCT0614-001A-H - Manual (Page 7)

There are two basic types of cable or antenna connections:
• If you have an antenna or have a cable system that does not require you use a cable box to select
channels, please refer to Diagram #1.
• If you use a cable box to access any or all the channels, please refer to Diagram #2.
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input at the rear of your TV/VCR
combo.
1) Connect the cable TV wire from the wall outlet, in to the RF Input on your Cable Box.
2) Connect an RF cable from the Cable Box Output, in to the RF input at the rear of your TV/VCR combo.
Cable or Antenna Connections
#1
#2
Connections 7
Refer to the Cable Box instructions for more information on its operation.
NOTE: