Sdsp3, Others – JVC BD-X201M User Manual

Page 43

Advertising
background image

74

Others

Changing the Signal System (NTSC / PAL)

This DVD recorder supports both the NTSC and PAL signal systems.
The signal system can be altered at the TV TYPE item on the SYSTEM(2/2) menu screen, or via the following procedure.
The signal system can be changed even when the monitor is not connected.

Operation Procedure

1.

Set this unit to the Stop mode.

2.

Press and hold the SETUP and STOP buttons simultaneously for approximately 3 seconds.
● This changes the signal system. When this is done, the unit will turn off automatically and rebooted.

This product uses partial third-party software.
For information concerning the software used, login via FTP by
inputting the following into the unit and view the readme.txt file:
User: anonymous
Password: None
(If the IP address of the unit is set to 192.168.0.2, FTP
connection can be established by entering ftp://196.168.0.2 in
the address bar of Internet Explorer.)

75

Specifications

Recording format : DVD Video Version 1.1
Disc format

: ISO9660-compatible UDF

Recordable media : DVD-R For General Version 2.0

DVD-RW Version 1.1

Recording signals : Must conform to DVD Video Format

Video Signals
Line input

: 1.0 V(p-p), 75

Ω unbalanced

Y/C input

: Y signal = 1.0 V(p-p), 75

Ω unbalanced

C signal = 0.286 V(p-p), 75

Ω unbalanced (NTSC)

C signal =0.3 V (p-p), 75

Ω unbalanced (PAL)

Line output

: 1.0 V(p-p), 75

Ω unbalanced

Y/C output

: Y signal = 1.0 V(p-p), 75

Ω unbalanced

C signal = 0.286 V(p-p), 75

Ω unbalanced (NTSC)

C signal = 0.3 V(p-p), 75

Ω unbalanced (PAL)

Encoding format

: ISO/IEC13818-2 (MPEG-2 video)

Quantization

: 8 bit

Sampling rate

: 13.5 MHz

Audio Signals
Line input

: –8 dBs, 10 k

Ω minimum, unbalanced

+4 dBs, high impedance, unbalanced

Line output

: –8 dBs, 1 k

Ω minimum, unbalanced

Standard level

: –20 dBFS

Dynamic range

: 85 dB

Recording format : LPCM / DOLBY DIGITAL / MPEG (PAL only)
Quantization

: 16 bit

Sampling rate

: 48 kHz

Number of channels: 2

DV Interface
I/O

: IEEE1394

General
FOOT SWITCH terminal: 3.5 mm Monaural mini jack

(OPEN/SHORT control
Operation follows menu settings.)

Network terminal

: RJ-45 (Category5),

100 BASE-Tx

USB terminal

: USB 1.1

× 2

Power supply

: AC 100V to 240 V

`, 50 Hz / 60 Hz

Power consumption : 1.0 A to 0.45 A
Weight

: 4.8 kg (device only)

Dimensions

: 212 mm (w)

× 352 mm (d) × 88 mm (h)

(not including feet and other protrusions)

Permissible operating temperature : 5 °C to 35 °C
Permissible operating humidity

: 20 % to 80 % RH

Permissible storage temperature

: –20 °C to 60 °C

Permissible storage humidity

: 5 % to 80 % RH

Accessories
Instruction manual ................................................................

×1

Power cord ...........................................................................

×2

Ferrite core (for USB cable) .................................................

×1

(

☞ Page 23)

* Design and specifications are subject to change without notice.

External Dimensions (Unit: mm)

SDSP3

SDSP3

212

88

6.5

20

352

OPERATE

PHONES

REV

STOP

PLAY

DVD RECORDER BD-X201M

FWD

PAUSE

REC

BUSY

OPEN/CLOSE

TOP

MENU

MENU

OPTION DV

Y/C LINE

SET UP

AUDIO

CH1

CH2

TITLE

DOLBY DIGITAL
LPCM MPEG

CHAPTER

SET

Advertising