JVC KD-LH1105 - Manual (Page 20)

20
ENGLISH
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your
preference.
• “Vol Adj” setting is required for each source
except FM. Before starting “Vol Adj,” select an
appropriate source for which you want to make
an adjustment.
1
Select the item you want to adjust.
The next-step-operation
buttons start flashing.
Each time you press SEL
(select), the adjustable items
change as follows:
Indication To do: Range
Fad* 1 Adjust the front R06 (Rear only)
and rear speaker |
balance. F06 (Front only)
Bal Adjust the left L06 (Left only)
and right speaker |
balance.
R06 (Right only)
Vol Adj* 2 Adjust and store –12 (min.)
the input level |
of each source. +12 (max.)
2
Make adjustments.
• To adjust fader and balance—Fad, Bal:
You can make these two adjustments at
the same time, by referring to the
indication on the display.
• Press 5 (up) or ∞ (down)
to adjust the fader.
• Press ¢ or 4
to adjust the balance.
• To adjust the input level of each source
—Vol Adj:
* 1 If you are using a two-speaker system, set the fader
level to “00.”
* 2 By adjusting the input level to match it to the FM
sound level, you will not need to adjust the volume
level each time you change the source. This
adjustment is memorized for each source except
FM.
Fad (Fader)
Bal (Balance) Vol Adj
(Volume Adjustment)
Canceled
To decrease the level
To increase the level
Canceled
EN20-23KD-LH1105[U]f.p65 1/24/03, 2:52 PM 20