GE 97916 GE High Speed USB 2.0 Stackable 7-Port Hub - Manual (Page 15)

VII. Software Installation
Software installation is only required for Windows
 98 and 98 SE users.
Users of all other Operating Systems, including Windows
 NT, ME,
2000, XP and Mac
, may skip this section.
1) When your hub is connected to your computer, Windows
 98 and
98 SE will detect the hub and automatically run the “Add New
Hardware Wizard”.
2) When the initial screen appears introducing the “Add New Hardware
Wizard”, click Next.
3) Select “Search for the best driver for your device (Recommended):
and click Next.
4) When asked to select a location to search for the drivers, use the
default selection. Do not change the location. Click Next.
5) Click Next to accept the location the driver will be installed in.
On the final screen notifying you that the driver has been installed, click
Finish.
15