GE 97916 GE High Speed USB 2.0 Stackable 7-Port Hub - Manual (Page 8)

A. Attach Hub Stand with Magnets
1. Place the metal magnet holder, and magnet on the stand as
shown in the diagram.
2. Using the included screws, fasten the magnet to the stand as
shown in the diagram.
3. Follow the directions in Sections C & D to attach the hub to the
stand.
4. Attach the stand with the hub to your desk, or other flat metal
location.
Note: To eliminate data loss, do not place disks near the magnets.
Screw
Screw
Magnet
Metal Magnet Holder
Magnet
Metal Magnet Holder
Bottom of Stand
8