Jwin JT-P870 - Manual (Page 12)

12/19/2003 8:34 AM 12
IMPORTANT NOTES:
To operate this unit with all features active, you must have ‘CALLER ID SERVICE’ setup with
your local telephone company. Some functions such as ‘CALLER NAME ID’ will only
operate if such services are included in the user’s Caller I.D. program with the local telephone
company.
SAFETY INSTRUCTIONS
- This telephone is an electrical device and can be hazardous if immersed in water. If
the user accidentally drops it into water, first unplug it from wall jack, and remove it
from water.
- Please keep the telephone dry and do not use it in a damp place, i.e., near a bathtub,
washbowl, kitchen sink, laundry tub or swimming pool. Do not use it in rain.
- Unplug the phone from the wall jack before cleaning with damp cloth; please do not
use liquid or aerosol cleansers.
- Do not use the phone to report a gas leak in the gas vicinity (as the phone may cause a
spark). Please remove yourself immediately from the area and make the emergency
phone call in a safe area.
- Handle the phone carefully. Do not drop it.
- Do not use or put the unit in extreme temperatures.
- Keep the phone free of dust and dirt.
- Use the correct power batteries as indicated in the manual. Do not put batteries in a
fire as such action can lead to an explosion.
- Do not modify or tamper with the telephone’s internal components. Improper
adjustment can cause damage and can be dangerous.
REMARKS
If the telephone’s DC 9V adaptor is disconnected for more than 24 hours (while the
batteries remain installed), it may not function properly when the adaptor is re-connected.
The solution is as follows (in this order):
1. Unplug the adaptor.
2. Remove the batteries.
3. Re-plug the adaptor. The telephone will run a memory check for 15 seconds and return
to normal functioning. (All information will be reset.)