Juniper Networks ERX-1410 - Manual (Page 15)

About This Guide
This ERX Installation and User Guide provides the information you
need to install and start the ERX edge router.
Note: If the information in the ERX Release Notes differs from the information in
this guide, follow the ERX Release Notes.
Your ERX system is shipped with the latest system software installed. If
you need to install a future release or reinstall the system software, refer to
the procedures in
Appendix E, Installing ERX System Software .
ERX Edge Routers
Four models of the ERX edge router are available:
• ERX-1440 system
• ERX-1410 system
• ERX-705 system
• ERX-700 system
All models use the same software. For information about the differences
between the models, see
Chapter 1, ERX System Overview .
In the ERX documentation, the term ERX-1400 series refers to both the
ERX-1440 system and the ERX-1410 system. Similarly, the term
ERX-700 series refers to both the ERX-705 system and the ERX-700
system. The terms ERX-1440 system, ERX-1410 system, ERX-705
system, and ERX-700 system refer to the specific models.