Juniper Networks ERX-1410 - Manual (Page 75)

Cabling I/O Modules
ERX Edge Routers
4-11
To cable I/O modules with HSSI connectors:
1
Insert the HSSI connector into the selected port.
2
Terminate the other end in the appropriate network connection.
3
Repeat steps 1 and 2 for the other ports.
Figure 4-5 HSSI I/O module with 50-pin HSSI connector
Cabling RJ-45 Connectors
To cable I/O modules with RJ-45 connectors:
1 Insert the RJ-45 connector into the selected port.
2 Terminate the other end in the appropriate network connection.
3
Repeat steps 1 and 2 for the other ports.
HSSI-3
I/O
0
1