Juniper Networks ERX-1410 - Manual (Page 76)

CHAPTER 4
Cabling the ERX System 4-12
Figure 4-6 I/O module with RJ-45 connector
Cabling RJ-48C Connectors
To cable I/O modules with RJ-48C connectors:
1 Insert the RJ-48C connector into the selected port.
2 Terminate the other end in the appropriate network interface, such
as a multiplexer (MUX) device.
3 Repeat steps 1 and 2 for all ports.
.
Figure 4-7 I/O module with RJ-48C connectors
10/100
FE-2
I/O
Port 0
Port 1
RJ-45
CE1
I/O
Port 0
Port 1
Port 2
Port 3
Port 4
RJ-48C