Jabra EXTREME FOR PC bT530 - Manual (Page 12)

11
en
g
li
sh
Jabra EXTREME – FOR PC
I cannot hear anything in my headset
- Increase the volume in the headset .
- Ensure that the headset is paired to a device that is playing .
- Make sure your phone is connected to the headset by tapping
the answer/End button .
I am having pairing problems
- you may have deleted your headset pairing connection in your
mobile phone . Follow the pairing instructions .
I want to reset the headset
- It is possible to reset and test the headset by ’pressing and
holding’ all three buttoms at the same time . The red, blue and
green light will light up in a white light . In this mode, the pairing
list is reset, and you can test if the headset works as you will be
able to hear audio in the speaker from the microphone .
- The headset will automatically turn off after approx . 10 seconds .
The next time you power on, the headset will go into pairing
mode as the first time you powered your new EXTREME on .
Will the Jabra EXTREME work with other Bluetooth® equipment?
- The Jabra EXTREME is designed to work with Bluetooth® mobile
phones . It can also work with other Bluetooth® devices that are
compliant with Bluetooth® version 1 .1 or higher and support a
headset, hands-free and/or advance audio distribution profile .
I cannot use Reject call, call on hold, Redial or voice dialling
These features are dependent on the ability of your phone to
support a hands-free profile . Even if the handsfree profile is
implemented reject call, call hold and voice dialing are optional
features which are not supported by all devices . Please consult
your device manual for details .
Please note that some features can only be operated from the
primary device e .g . voice dial using Jabra EXTREME with 2 mobile
phones .
For use with your PC you need to have Jabra PC Suite installed and
running on your PC to use these functions . Please download Jabra
PC Suite at www .jabra .com/jabrapcsuite .