JVC LPT0715-001A - Manual (Page 18)

18
ATS
Changing TV station names
For a number of TV stations (such as
MTV) no name code will be displayed
because these TV stations do not
provide the necessary information.
You can enter the respective names
yourself. Moreover, unwanted station
codes can be changed by the user.
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then
press VCR to select the VCR mode. (The VCR indicator will light)
Example: MTV is assigned to station No. 10, but the code “MTV” will
not be displayed and will also not appear in the table.
1
Select the "CHANNEL MAPPING" in Menu-screen in the same
way as the step 1 ~ 2 on page 16. Then press OK.
2
Press / or / repeatedly
until the station number position
now to be named will blink.
• If you want to turn over the page
when the blinking spot is in the
left or right edge of on-screen,
press
or repeatedly until
the next page's 12 stations ap-
pears.
3
Press "1" of number keys. The
first display line will change to
"CHANGE BROADCAST
NAME".
4
Press or repeatedly until
the desired character appears.
Then press
. Use or to
select the next character. Then
press
. Up to four characters
can be used to create a station
name. The character “ ” stands
for a space.
Then press OK.
Each press of will change the screen display as follows.
5
Press SET UP MENU repeatedly until the TV picture appears
on the screen.
12
10
11
OK
SELECT :
NAME
CANCEL
EXIT : MENU
CLEAR :
:
: OK
CHANGE BROADCAST NAME
1 ARD
2 ZDF
6 BR3
9 HR3
3 RTL
4 SAT1
5 PRO 7
7 SW3
8 N3
OK
12
10 M
11
SELECT :
NAME
CANCEL
EXIT : MENU
CLEAR :
:
: OK
CHANGE BROADCAST NAME
1 ARD
2 ZDF
6 BR3
9 HR3
3 RTL
4 SAT1
5 PRO 7
7 SW3
8 N3
CHANGE NAME
CHANNEL MAPPING
1
2
6
9
12
3
4
5
7
8
10
ARD
ZDF
BR3
HR3
RTL
SAT1
PRO 7
SW3
N3 11
SELECT
SKIP
EXIT
MOVE
:
:
:
:
:
CANCEL
1
2
MENU
A, B, C, ... X, Y, Z 0, 1, 2, ... 7, 8, 9
– + / •
Note:
When a wrong character is entered,
press CANCEL and enter the correct
character.
2A73501AE(16-21) 4/17/02, 8:26 PM 18