JVC LPT0715-001A - Manual (Page 11)

11
Playback connection
The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is
dependent on the model and features of each component. Check the Owner's Manual provided with each
component for the location of SCART socket.
Connection to a Satellite Receiver
If a Satellite Receiver is used, we recommend the following configuration:
Connection to a Decoder (for Premiere Programs)
Decoder
RF-Output
SCART-cable (not supplied)
Cable TV-
connection
TV-unit
SCART-cable (not supplied)
DVD/VCR
To record from Satellite Receiver press "AUX" on the remote control of DVD/VCR twice. "A2" will appear
on the front display. Select the desired TV-program at Satellite Receiver.
Connect to a TV with S-Video Output
CLOCK SET
SYSTEM SETUP
LANGUAGE/SPRACHE/LANGUE
AV2
[DEC]
SELECT :
ENTER : OK
MENU EXIT :
Note: Make sure that AV - mode in SYSTEM SETUP - menu has been set
to DEC .
SCART-cable (not supplied)
Satellite
Antenna
Satellite
Receiver
DVD/VCR
TV
SCART-cable (not supplied)
Note:
• The S-VIDEO jack is useful only for DVD section.
• If you use the connection with S-Video Cord, set the "Video Out Select" (P.44) to "Video".
DVD/VCR
TV
S-Video Cord (not supplied)
To Audio (R) Input To S-Video Input
To Audio (L) Input
S-Video Output
AUDIO Cord (not supplied)
Audio (L) Output
Audio (R) Output
2A73501AE(06-11) 02.4.22, 12:53 PM 11