John Lewis U33046 JLTDC10 - Manual (Page 19)

2. Pull the filter housing out of the base by
the handle.
3. Clean the inside of the door, the fluff filter
chamber and the rubber seals of fluff.
4. Remove fluff from the fluff filter on the
floor of the base with a damp hand.
5. To clean the fluff filter: Remove the filter
from the filter housing. To do this, press
the pressure points on the sides and pull
the filter frame up and out of the housing.
1
1
2
6. Remove fluff from the fluff filter with a
damp hand. If necessary, clean the filter
under running water using a brush.
7. Insert the fluff filter into the filter housing.
8. As necessary, approx. once every 6
months, remove the fluff from the heat
exchanger using the sponge supplied.
When doing this, please use rubber
gloves.
19