JBL Professional JBL Soundfactor SF12Mi - Manual (Page 3)

Working Load Limit
3
The JBL SoundFactor Install loudspeakers are supplied with built-in internal braces to be used with the
supplied forged shoulder eyebolts or other approved fastener. The system is designed to facilitate the sus-
pension of the loudspeaker by a qualified person familiar with rigging hardware and industry practices.
IMPORTANT! You must ensure that ALL installation procedures specified in this manual
are carefully followed. Improper installation may result in damage, injury or death.
The working load limit (WLL) of any JBL SoundFactor Install loudspeaker is maintained as long as no
more than one loudspeaker is suspended by a minimum of two primary suspension points with no addi-
tional load placed on the loudspeaker enclosure. The JBL SoundFactor Install loudspeakers are intend-
ed for SINGLE-BOX SUSPENSION ONLY. DO NOT HANG A SECOND SPEAKER FROM A SOUND-
FACTOR INSTALL SPEAKER.
Secondary
Load
Secondary
Load Primary
Load
Primary
Load
Primary
Load
Secondary
Load
Primary
Load
SF15i
SF12Mi