JBL Professional JBL Soundfactor SF12Mi - Manual (Page 9)

9
Specifications - SF12Mi
SF12Mi
System Type: 12" 2-way, stage monitor
Frequency Range (-10 dB):² 60 Hz - 16 kHz
Frequency Response (±3 dB):² 70 Hz - 12 kHz
Sensitivity (1w/1m): 98 dB SPL
Nominal Impedance: 8
Ω
Power Capacity:¹ 250 watts
Peak Power Capacity:¹ 1000 watts
Maximum SPL: 129 dB
Nominal Dispersion: 90° x 50°
Crossover Frequency: 1.8 kHz
Dimensions (H x W x D): 584.2 mm x 393.7 mm x 317.5 mm
(23 in x 15.5 in x 12.6 in)
Weight: 19.5 kg (43 lbs.)
Shipping Weight: 22.0 kg (48.5 lbs.)
High Frequency Driver: JBL 2412 1" exit compression driver mounted on Progressive Transition™ Waveguide
Low Frequency Driver: JBL M112-8
Input Connectors: Neutrik® Speakon® NL-4 (x1); 1/4" TS phone jack (x1); parallel
Enclosure Construction: 19 mm (3/4 in) MDF (Medium Density Fiberboard); with glued and mechanically fastened joint
detail; covered in black carpet.
Grille: 18 gauge, powder-coated steel
Suspension: 3x M10 threaded suspension points
Suspension Kit: 3x 10 mm forged shoulder eyebolts with washers
Notes:
1. "Power Capacity" and "Peak Power Capacity" ratings are based on the average and peak power handling capacity of product
samples subjected to a 100 hour power test of the system design using IEC filtered random noise with a crest factor of 6 dB.
2. "Frequency Range" and "Frequency Response" are based on half-space response.
TIP TIP GRD GRD
+
-
+
-
HPF
LPF
JBL PROFESSIONAL
Northridge, CA USA
Made in USA
MODEL SF12
IN / OUT
(PARALLEL JACKS)
8 OHMS
±1 FULL-RANGE
±2 N/C
1- 1- 1+ 1+