JVC NX-PN7 - Manual (Page 21)

17
Playing Back from Other Equipment
Connecting Other Equipment
By using a stereo mini plug cord (not supplied), you can connect other equipment with analog audio
output jacks, such as a portable audio player, etc.
• Refer to the instruction manual supplied with the equipment.
NOTE:
Make sure the unit is on standby when connecting or disconnecting other equipment.
Operations
To Listen to Other Equipment
To Adjust the Sound Input Level from the Equipment
You can adjust the sound input level from the connected equipment, if the incoming signal is too
small or too large.
1 Select AUDIO IN as the source.
2
Start playing the equipment.
1 Select AUDIO IN as the source.
2
Hold down to adjust the sound input level.
LEVEL 1: Ordinary input level.
LEVEL 2: Increases the input level.
LEVEL 3: Increases the input level more than “LEVEL 2.”
Stereo mini plug cord
(not supplied)
Portable audio device
Right side
FM
AUDIO IN
AM
LEVEL 1
LEVEL 3
LEVEL 2
NX-PN7[J].BOOK Page 17 Friday, April 18, 2008 3:53 PM