JVC NX-PN7 - Manual (Page 9)

5
Connecting the Video Cord to View a Video/Picture from iPod
When viewing a video/picture from your iPod on your TV, use a composite video cord (not
supplied) to connect the VIDEO OUT jack on the unit and the composite video input on your TV.
Connecting the Power Cord
Canceling the Display Demonstration
When you connect the AC power cord for the first time, the display demonstration starts
automatically.
• When you operate the unit, the display demonstration stops temporarily. If no operation is done
for 2 minutes, the unit starts the display demonstration again.
• To activate again, hold down DEMO until “DEMO ON” appears on the display.
• When the ECO mode is activated (P.9), the display demonstration does not function.
Buttons
Function
On the Unit On the remote
Hold down until “DEMO OFF” appears on the display.
Video cord (not supplied)
Right side
To a wall outlet
Plug in the AC power cord
only after all connections are
complete.
Right side
NX-PN7[J].BOOK Page 5 Friday, April 18, 2008 3:53 PM