Jensen Phase Linear UV8020 - Manual (Page 18)

14
UV8020
• TITLE: Press to display the title or chapter list. Use the
, , or cursor buttons or the numeric buttons to
enter a title or chapter number, and then press OK to
play.
• ANGLE: Press to select an alternate viewing angle, if
available.
• ZOOM: Press to zoom the picture at ZOOM 2, ZOOM 3,
ZOOM 4, ZOOM 1/2, ZOOM 1/3 or ZOOM 1/4, or select
OFF to return to normal view.
NOTE: Feature availability is dependent upon DVD
embedded information.
Programmed Playback
1. Press the PROG button (34) on the remote control to
access the programmed playback screen:
2. Use the , , or cursor buttons to access the
fields on the “PROG” screen.
3. Use the number buttons on the remote control to enter a
track number in each field.
4. Press the >/|| button (19) on the remote control or
highlight “PLAY” on screen and then press OK to begin
playback in the numbered order indicated.
To delete the list, highlight “CLEAR” and then press OK.
Press PROG to exit the programmed playback screen.
Remote Control Direct Track Entry
To select a track directly, use the number pad on the remote
control (27). For single digit entries, press the corresponding
number. For two digit entries, press the 10+ button followed
by the last digit (i.e., for track 16, press 10+ and then 6).
GOTO Direct Track/Chapter Access
Use the GOTO function to access a track (chapter) directly.
1. Press the GOTO button (20) on the remote control. The
On Screen Display information will appear with the track
number highlighted.
2. Use the number keys on the remote control to enter the
3-digit track number directly (i.e. for track 10, enter
“010”.
3. Press the OK button to confirm and begin playback.
Playback Information
During DVD and VCD playback, press the OSD button (10)
on the remote control to display playback information on the
screen, including the media playing and current playback
time. Continue pressing the OSD button to display additional
information, as indicated below.
DVD Playback Information
The following information is displayed at the top of the screen
during DVD playback:
• TT 5/8 – “5 / 8" indicates the fifth of 8 titles on the DVD is
currently playing.
• CH 2/16 – “2 / 16" indicates that the second of 16 titles
on the DVD is currently playing.
• Press OSD repeatedly to view the following information:
for elapsed/remaining playing time:
• 00:02:18 – total elapsed playing time for disc
• C –00 :34 :37 – remaining playing time
• T 00:02:18 – total elapsed playing time for current
track
• C –00 :34 :37 – remaining playing time for current
track
• 1/5 ENG – English is the selected audio language
out of 5 possible choices
• 5.1 CH – The current language is recorded in 5.1
surround sound
• 1/4 ENG – English is the selected subtitle language
out of 4 possible choices
• OFF – There are no alternate angles recorded for
this scene
VCD Playback Information
The following information is displayed at the top of the screen
during VCD playback:
• TRK ##/## – “1/18” indicates the first of 18 tracks on the
VCD is currently playing.
• – “X” indicates repeat play is OFF, “1” indicates
repeat track, “D” indicates repeat directory, and “A”
indicates repeat disc.
• Press OSD repeatedly to view the following information:
for elapsed/remaining playing time:
• 00:02:18 – total elapsed playing time for disc
• C –00 :34 :37 – remaining playing time
• T 00:02:18 – total elapsed playing time for current
track
• C –00 :34 :37 – remaining playing time for current
track
General Disc Information
PROG
OK
Table 5: Disc Properties
Symbol 12cm Disc Properties
Max Play
Time
Single side single layer
(DVD-5)
Single side double layer
(DVD-9)
Double side single layer
(DVD-10)
Double side double layer
(DVD-18) (MPEG 2
Method)
133 minutes
242 minutes
266 minutes
484 minutes
Single side single layer
(VCD) (MPEG 1
Method)
74 minutes
Single side single layer 74 minutes