Jura Capresso S7 - Manual (Page 16)

16
13.6 Programming the temperature for coffee,
espresso and coffee à la carte
You can adjust the temperature for each type of coffee sepa-
rately. The temperature can be set to 2 different levels
(NORMAL, HIGH).
Ⅲ SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
TEMP
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ
SELECT PRODUCT
Ⅲ Then press a product key of your choice.
Ⅲ
TEMP
NORMAL (example)
Ⅲ Now turn the Rotary Switch (4) until the required temperature is
set.
Ⅲ TEMP
HIGH (example)
Ⅲ Confirm the selected setting by pressing the Rotary Switch (4).
Ⅲ
TEMP
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ
EXIT
Ⅲ Now press the Rotary Switch (4) to leave the programming
mode.
Ⅲ
SELECT PRODUCT
13.7 Programming the water portion
The system’s basic settings include a pre-defined amount of water
(225 ml). However, this amount can be modified as required.
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ
FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
WATER
PORTION
Ⅲ Press the Rotary Switch (4) to activate the program item.
Ⅲ
PORTION
225 ML (example)
Ⅲ Turn the Rotary Switch (4) to adjust the amount of water and
then confirm your setting by pressing the Rotary Switch (4).
Ⅲ WATER
PORTION
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
EXIT
Ⅲ Press the Rotary Switch (4) to leave the programming mode.
Ⅲ
SELECT PRODUCT
13.8 Programming the steam portion
The system’s basic settings include a pre-defined steam portion (20
sec.). However, this amount can be modified as required.
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.