JVC LX-D1000 - Manual (Page 3)

– 3 –
Fig. 3-1
Unit of indicated dimensions (mm)
Note:
❈ Air inlet:
This is an inlet to bring cool air into the LCD
projector. Do not cover it with a lid, etc.
Unit of indicated dimension (mm)
Note:
❈ Exhaust hole:
This is a hole to exhaust hot air inside the LCD projector. When
installing the unit near a wall, etc., keep it away more than 50 cm
or so from the face of the exhaust hole.
Fig. 4 FRONT VIEW
Fig. 3 ASSEMBLY
WARNING
(*) Parts
: The asterisked parts such as the holder plates (2 plates), fastening bolts for holder plates (8 bolts), and fastening bolts for body’s
plate (4 bolts) are built in to constitute component parts of the body’s plate.
: Never remove the above-mentioned component parts under any circumstances since they are absolutely required to ensure safety.
Exhaust hole (❈)
24
150
150
155
(109.6)
(109.6)
10 20
!3 Washer (for M10)
Hexagon socket bolts
for M5
!7 2 rotary mini
setscrews (M5 × 5)
Body’s plate
Air inlet (❈)
LCD projector
(*) Holder plates (2 plates)
(*) Fastening bolts for
body’s plate (4 bolts)
(*) Fastening bolts for
holder plate (8 bolts)
q Coupling
plate
w Supporter for LCD projector
e 4 assembling bolts (M8 × 25)
r 2 rotary setscrews [E] (M5 × 10)
t 2 screws [A]
(M4
× 12)
y Ceiling plate
u Inner pole
i Inner pole
fixing plate
o 4 hexagon socket
bolts (M5 × 10)
!0 Collar
!1 Hexagon head bolts
[C] (M10 × 65)
!2 Nut
!3 Washers (for M10)
!4 2 screws [B] (M8 × 14)
!5 Hexagon wrench
(accessory)
Size of fixing hole of base metal fixtures
!9 4 washers
(for M5)
@0 4 nuts (for M5)
!8 4 hexagon socket
bolts (M5 Ч 16)