Subsidiary settings, Mode set, A pg. 71) – JVC DR-DX5SE User Manual

Page 71: Audio output

Advertising
background image

Masterpage:Right0

EN

71

Filename [DX5SEU_13Subsidiary.fm]

Page 71Wednesday, 23 November 2005 14:13

SUBSIDIARY SETTINGS

Various modes of this unit are categorized into menus nested in 2
levels shown in the following table. To change the settings of these
modes, find the desired mode in the menu (for details on each
menu, see pages 71 through 73), then follow the procedure below.

The procedure below shows how to set the desired option of the
AAUDIO RECB mode as an example.

1

Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.

2

Press SET UP to access the Main Menu screen.

3

Press selection keys to select

AFUNCTION SET UPB, then

press

G.

4

Press selection keys to select
AREC/PLAY SET UPB, then
press

G.

5

Press selection keys to select
AAUDIO RECB, then press
ENTER.

6

Press selection keys to select
the desired option, then press
ENTER.

7

Press SET UP to complete the setting.

* The boldface settings below indicate the settings at your purchase.

AUDIO OUTPUT

8

DIGITAL AUDIO OUT

^

DOLBY DIGITAL/PCM /

STREAM/

PCM

/ PCM ONLY

Set to the appropriate mode according to the type of the device
connected to [DIGITAL AUDIO OUT] connector.

DOLBY DIGITAL/PCM

:

Select this when you connect the digital input connector of a
Dolby Digital Decoder or an amplifier with a built-in Dolby Digital
Decoder.

STREAM/PCM

:

Select this when you connect the digital input connector of an
amplifier with a built-in DTS, Dolby Digital, or MPEG
multichannel decoder.

PCM ONLY

:

Select this when you connect the linear PCM digital input of
other audio equipment (amplifier, MD or DAT deck, etc.).

NOTES:

This setting also functions when HDD is active.

If you watch or play back a title which contains multiple audio
languages, select

APCM ONLYB in advance and choose main or

sub audio with AUDIO.

8

ANALOG AUDIO OUT

^

STEREO

/ DOLBY SURROUND

Select the appropriate setting to accommodate the unit to the
connected A/V equipment. This function takes effect when a
DVD VIDEO disc is played back.

STEREO

:

Select this when listening to conventional two-channel stereo
audio with the unit’s [AUDIO OUT] connectors connected to a
stereo amplifier/receiver or TV set, or in case you want to
record the audio from a DVD VIDEO disc to a Mini Disc, etc.

DOLBY SURROUND

:

Select this when listening to multichannel surround audio with
the unit’s [AUDIO OUT] connectors connected to an amplifier/
receiver with a built-in surround decoder or a surround decoder.

8

D. RANGE CONTROL

^

NORMAL

/

WIDE RANGE / TV MODE

The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a
programme encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.

NORMAL

:

Normally select this setting to activate this function.

WIDE RANGE

:

Select this to deactivate this function when you enjoy wide
dynamic range programme.

TV MODE

:

Select this when you hear the sound through the TV’s
speaker(s).

NOTES:

This function has no effect on programmes other than those
recorded in Dolby Digital format.

This function does not work when Simulated Surround Effect is
activated. (A pg. 29)

The effect of

ANORMALB and AWIDE RANGEB may not be

different depending on discs.

8

OUTPUT LEVEL

^

STANDARD

/ LOW

You can lower the output level of analogue audio to accommodate
the unit to the connected A/V equipment.

STANDARD

:

Normally select this setting.

LOW

:

The output level of analogue audio is lowered.

Mode Set

Turn on the unit.

Turn on the TV and select the AV mode.

Slide the TV/CABLE/SAT/DVD switch to DVD.

DVD VIDEO SET UP

LANGUAGE SET (A pg. 20)
AUDIO OUTPUT (See right column)
PARENTAL LOCK (A pg. 31)
DISC PLAY SET UP (A pg. 72)

HDD/DVD/DV SET UP

HDD SET UP (A pg. 72)
DVD SET UP (A pg. 72)
DISC SET UP (A pg. 78, 79)
DV SET UP (A pg. 72)

FUNCTION SET UP

REC/PLAY SET UP (A pg. 72)
DISPLAY SET (A pg. 73)
VIDEO IN/OUT (A pg. 21, 63)

INITIAL SET UP

TUNER SET (A pg. 74)
CLOCK SET (A pg. 77)

FGDE

ENTER

AUDIO

SET UP

DVD

HDD

CABLE/SAT

DVD

TV

Selection Keys

ENTER

SELECT

SET UP

EXIT

DVD VIDEO SET UP

XP MODE REC AUDIO

HDD/DVD/DV SET UP

FUNCTION SET UP

INITIAL SET UP

REC/PLAY SET UP

DISPLAY SET

AUDIO REC

DIRECT REC

INPUT COLOUR SYSTEM

JUMP TIME

VIDEO IN/OUT

DOLBY DIGITAL

NICAM

OFF

PAL

15 MIN

SELECT WITH @ THEN PRESS [ENTER]

PRESS [SET UP] TO EXIT

DX5SEU_00.book Page 71 Wednesday, November 23, 2005 2:13 PM

Advertising