JVC DR-DX5SE - Manual (Page 72)

Filename [DX5SEU_13Subsidiary.fm]
Masterpage:Left+
72
EN
SUBSIDIARY SETTINGS
Page 72Wednesday, 23 November 2005 14:13
DISC PLAY SET UP
8
RESUME ^ OFF / ON / DISC RESUME
When this function is set to AONB or ADISC RESUMEB, you can use
the resume function. (A pg. 24)
OFF :
You cannot use the resume function.
ON :
You can start playback from the resume point of the placed disc.
DISC RESUME :
The unit retains a memory of the resume points of the last 30
discs played back, even though they have been ejected.
NOTE:
ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and
already finalised DVD-R/DVD-RW (video mode) discs. For other
types of discs, the function under
AONB setting will be applied even
if ARESUMEB is set to ADISC RESUMEB.
HDD SET UP
8
LIVE MEMORY ^ OFF / 30 MIN / 1 HR / 3 HR
When this function is set to A30 MINB, A1 HRB or A3 HRB, you can
apply the selected time length to ATemporary recording for Live
Memory (HDD deck only) B (A pg. 43).
DVD SET UP
8
SAVE AS LIBRARY ^ OFF / ON
When this function is set to AONB, the recording information is
automatically stored in the library. For details, refer to ANavigate
Library Information B (A pg. 54).
8
CONTINUOUS PLAY ^ OFF / ON
When this function is set to AONB, multiple titles on a disc are
played back continuously one after another.
8
VIDEO MODE RECORDING ASPECT ^ PRIORITIZE 4:3 /
PRIORITIZE 16:9
This is the setting for the aspect ratio used when you dub titles to
DVD discs in video mode. If the titles you want to dub are recorded
in both 16:9 and 4:3, you must select one aspect ratio.
PRIORITIZE 4:3 :
If you select APRIORITIZE 4:3B, even a title recorded in 16:9 is
dubbed in 4:3.
PRIORITIZE 16:9 :
If you select APRIORITIZE 16:9B, even a title recorded in 4:3 is
dubbed in 16:9.
8
VIDEO MODE RECORDING AUDIO ^ MAIN / SUB
This is the setting for the audio channel to be selected when
dubbing titles to DVD discs in video mode. Select either one of the
two settings if the titles to be dubbed have two audio channels.
MAIN :
Select this to dub the main channel.
SUB :
Select this to dub the sub channel.
8
MP3 & WMA / JPEG ^ MP3 & WMA / JPEG
You can select files to play back, when both MP3&WMA files and
JPEG files are recorded on a disc.
MP3 & WMA :
Select this to play back MP3/WMA files.
JPEG :
Select this to play back JPEG files.
DV SET UP
8
DV AUDIO REC ^ 12BIT / 16BIT
This is the setting for sound mode before recording on a Mini DV
tape.
12BIT :
Enables Audio Dubbing later.
16BIT :
Audio Dubbing is not possible but the recorded sound quality is
higher than
A12BITB .
8
AUDIO MODE ^ SOUND1 / SOUND2 / MIX
You can select the desired sound mode when playing back an
audio dubbed Mini DV tape.
SOUND1 :
Original recorded sound.
SOUND2 :
Audio dubbed sound.
MIX :
Original recorded sound and audio-dubbed sound.
NOTES:
● When AAUDIO MODEB is set to AMIXB, both the main and sub
audio will be audible for bilingual tapes.
● To select only the main audio or only the sub audio of bilingual
tapes, set
AAUDIO MODEB to ASOUND1B.
REC/PLAY SET UP
8
XP MODE REC AUDIO ^ DOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a title in XP
mode. When this function is set to
ALINEAR PCMB, you can obtain
a high-quality audio sound.
DOLBY DIGITAL :
To record in Dolby Digital format.
LINEAR PCM:
To record in Linear PCM format.
8
AUDIO REC ^ NICAM / MONO
You can select the desired NICAM audio channel to be recorded
on a DVD-R/RW (Video mode) disc.
NICAM :
To record the main and sub language of NICAM audio.
MONO :
To record the standard (monaural) sound of NICAM audio.
NOTE:
This function works only for the NICAM bilingual programme.
8
DIRECT REC ^ OFF / ON
When this function is set to AONB, you can easily start recording the
programme that you are watching on your TV. While holding R,
press I on the remote control, or press R on the unit.
NOTES:
● When you use the Direct Rec function, be sure to use a TV
offering T-V LINK, etc. and connect a fully-wired 21-pin SCART
cable between the unit and the TV. (A pg. 16)
● If ADIRECT RECB is set to AOFFB, the R button functions as
described in ABasic RecordingB (A pg. 32, 35).
● During Direct Rec, A– –B appears on the front display panel.
● If a programme is recorded with the Direct Rec, the station name
will not be registered in the library.
A– – – –B will be displayed for
the station name.
● Even if there is no power supply for more than 60 minutes, the
unit keeps the setting.
ATTENTION:
When SET UP is pressed while in the DV deck mode, the unit
will switch to the previous deck mode (HDD or DVD). To proceed
to DV deck after changing the settings in the
ADV SET UPB
menu, press DV/HDD/DVD SELECT on the unit repeatedly or
DV on the remote control to select the DV deck.
DX5SEU_00.book Page 72 Wednesday, November 23, 2005 2:13 PM