John Lewis JLWD 1406 1400 - Manual (Page 14)

14
• An alarm code indicates a fault in the machine
operation (see page 28, "Something Not Working")
10 Programme phase indicator
lights
When you select a programme, the lights relevant to
the phases that form the programme light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried out
will remain lit.
When the washing or drying programme has finished,
the “End” light comes on and a flashing zero appears
on the display. The light of the ‘Start/Pause is off.
End
Prewash
Wash
Rinse
Rinse hold
Drain
Spin
Drying
E20
ATTENTION!
If you turn the programme selector dial to another
programme when the machine is working, all the lights
of the programme progress display will flash for about 2
seconds but the machine will not perform the new
selected programme.