JVC DR-MH30S - Manual (Page 70)

Filename [DR-MH30EU_10Subsidiary.fm]
Masterpage:Left+
70
EN
SUBSIDIARY SETTINGS
Page 70 Thursday, 27 May 2004 12:05
Guide Program Number Set
1
Press SET UP to access the Main Menu screen.
2
Press w e to select “INITIAL SET UP”, then press ENTER.
3
Press w e to select “TUNER
SET”, then press ENTER.
4
Press rt w e to select “GUIDE
PROG SET”, then press ENTER.
5
Press rt to select “GUIDE
PROG”, then press ENTER.
6
Press rt to select the Guide
Program number for the desired
station as shown in the TV listings.
Then press ENTER.
● To change the Guide Program
number in 10 increments, press and
hold rt.
7
Press rt to select “TV PROG”, then press ENTER. Press rt
to select the number of the unit’s channel position on which the
Guide Program number’s broadcast is received by the unit or the
satellite receiver. Then press ENTER.
● Pressing AUX changes “TV PROG” to “SAT”.
● To timer-record a satellite programme with the S
HOW V IEW system,
you need to install the provided Satellite Controller and perform the
procedure described in “Satellite Receiver Control Setting”
(
੬ pg. 23).
● Repeat steps 5 – 7 as necessary.
8
Press SET UP to complete the setting.
Your unit needs to memorise all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the PR +/– buttons without going through any
vacant channels.
Auto Channel Set
1
Press SET UP to access the Main Menu screen.
2
Press w e to select “INITIAL SET UP”, then press ENTER.
3
Press w e to select “TUNER SET”, then press ENTER.
4
Press rt w e to select
“AUTO CH SET”, then press
ENTER.
5
Press rt w e to select your
country’s name, then press
ENTER.
6
Press rt w e to select the
language of your choice.
7
Press ENTER twice.
● When you have connected the unit
to a TV offering T-V Link via a
fully-wired 21-pin SCART cable
(
੬ pg. 17), the unit automatically
performs the Preset Download
and the T-V LINK screen will
appear. (
੬ pg. 19)
● The Auto Set screen appears, and
remains on screen while the unit
searches for receivable stations.
S
HOW
V
IEW TM System Setup
IMPORTANT:
Normally, Auto Set Up (
੬ pg. 18), Preset Download (੬ pg. 19) or
Auto Channel Set ( ੬ pg. 70) sets the Guide Program numbers
automatically. You need to set the Guide Program numbers manually
only in the following cases.
● When timer-programming with the S
HOW V IEW system, the channel
position, where the station you wish to record is received on your
unit, is not selected,
OR
when you add a channel after Auto Set Up, Preset Download or Auto
Channel Set has taken place,
—Set the Guide Program number for that station manually.
● When you wish to timer-record a satellite programme with the
S HOW V IEW system,
—Set the Guide Program numbers for all satellite broadcasts received
on your satellite receiver.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
Guide Program Number
“Guide Program (GUIDE PROG) number” refers to the assigned
TV station numbers, according to broadcast area, for the
S
HOW V IEW timer recording. The Guide Program Numbers can
be found in most TV listings.
13 12 11
PRESS [SET UP] TO EXIT
ENTER
SELECT EXIT
SET UP SELECT WITH [ ] THEN PRESS [ENTER]
CLOCK SET
AUTO CH SET
GUIDE PROG SET
MANUAL CH SET
TUNER SET
DVD VIDEO SET UP INITIAL SET UP FUNCTION SET UP HDD/DVD SET UP
SAT CONTROL SET
13 12 11
PRESS [SET UP] TO EXIT
ENTER
SELECT EXIT
SET UP SELECT WITH [ ] THEN PRESS [ENTER]
INITIAL SET UP > GUIDE PROG SET
TV PROG
GUIDE PROG
YLE2 1
1
RETURN
Tuner Set
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
IMPORTANT:
Perform the following steps only if —
— Auto Channel Set has not been set correctly by Auto Set Up
or by Preset Download. (
੬ pg. 18, 19)
— you have moved to a different area or if a new station starts
broadcasting in your area.
rtwe
ENTER
SET UP
CABLE/DBS
DVD TV
13 12 11
PRESS [SET UP] TO EXIT
ENTER
SELECT EXIT
SET UP SELECT WITH [ ] THEN PRESS [ENTER]
CLOCK SET
AUTO CH SET
GUIDE PROG SET
MANUAL CH SET
TUNER SET
DVD VIDEO SET UP INITIAL SET UP FUNCTION SET UP HDD/DVD SET UP
SAT CONTROL SET
PRESS [SET UP] TO EXIT
ENTER
SELECT EXIT
SET UP SELECT WITH [ ] THEN PRESS [ENTER]
INITIAL SET UP > AUTO SET
AUTO SET
PLEASE WAIT...
DR-MH30EU_00.book Page 70 Tuesday, June 1, 2004 5:34 PM