Now, you can plug the ac power cord, Connecting other equipment – JVC SP-UXP5 User Manual

Page 11

Advertising
background image

– 8 –

Speaker grille

To remove the speaker grille, inserting your fingers at the
top of the speaker grille, pull towards you. Then pull the
bottom towards you.

To attach the speaker grille, put the projections of the
speaker grille into the holes of the speaker.

Connecting Other Equipment

For UX-P6R and UX-P5R:

You can connect both of the analog and digital equipment.

For UX-P4R and UX-P3R:

You can connect audio equipment — used only as a
playback device.

• DO NOT connect any equipment while the power

is on.

• DO NOT plug in any equipment until all

connections are complete.

To connect audio equipment

Be sure that the plugs of the audio cords are colored: White
plugs and jacks are for left audio signals, and red ones for
right audio signals.

Holes

Projections

To remove the speaker grilles
(ONLY FOR UX-P6R and UX-P5R)

The speaker grilles are removed as the illustrations below.

IN

R

L

OUT

AUX

To audio output

Audio equipment

To audio input

For UX-P6R and UX-P5R

By using audio cords (not supplied), connect:
• Between the audio input jacks on the other equipment

and AUX OUT jacks: For recording on the other
equipment.

• Between the audio output jacks on the other equipment

and AUX IN jacks: For playing the other equipment.

R

L

AUX

To audio output

Audio equipment

For UX-P4R and UX-P3R

For playing the other equipment through this unit,
connect between the audio output jacks on the other
equipment and AUX jacks by using audio cords (not
supplied).

To connect audio equipment with an optical digital
input terminal (ONLY FOR UX-P6R and UX-P5R)

You can record CD sound onto the connected digital
equipment.

OPTICAL
DIGITAL
OUT

Before connecting the other equipment,
remove the protective plug from the
terminal.

Protective plug

Connect an optical digital cord (not supplied) between the
optical digital input terminal on the other equipment and the
OPTICAL DIGITAL OUT terminal.

Now, you can plug the AC power cord.

IMPORTANT: Be sure to check all connections to be done
before plugging the AC power cord into a wall outlet.

To optical digital input

Audio equipment
with an optical digital
input

EN01-13.UX-P5R&3R[B]

01.1.16, 4:32 PM

8

Advertising
This manual is related to the following products: