JVC BR-DV6000 - Manual (Page 25)

25
Display Description
A. DUB INHIBIT
(REC TAB)
A. DUB INHIBIT
(48 K)
A. DUB INHIBIT
(LP)
A. DUB INHIBIT
(BLANK)
A. DUB INHIBIT
(DV)
A. DUB INHIBIT
(NTSC/PAL)
A. DUB INHIBIT
(DVCAM)
EDIT INHIBIT
(REC TAB)
EDIT INHIBIT
(LP)
EDIT INHIBIT
(BLANK)
EDIT INHIBIT
(NTSC/PAL)
EDIT INHIBIT
(DV CAM)
EDIT INHIBIT
(AUDIO)
EDIT INHIBIT
(DV TC INS)
DV EE INHIBIT
OPERATION
LOCK
The user attempted to perform audio dubbing on a tape that is not ready for
recording (the rear switch is set to SAVE).
This message is displayed when audio dubbing is attempted under the following
conditions.
• AUDIO MODE of the AUDIO Menu screen is set to 48 K.
• The tape is recorded with a sampling frequency of 48kHz
The user attempted to perform audio dubbing on a tape recorded in the LP
mode.
The user attempted to perform audio dubbing of a blank tape.
The user attempted to perform audio dubbing during DV signal input (with the
INPUT SELECT switch set to “DV”).
The user attempted audio dubbing when PB/DV IN in the SYSTEM (2/2) Menu
screen is set to PAL.
The user attempted to perform audio dubbing on a DVCAM format tape.
The user attempted to edit a tape that cannot be recorded (with the rear switch
set to “SAVE”).
The user attempted to edit a tape recorded in the LP mode.
The user attempted to insert-edit an unrecorded part of a tape.
The user attempted editing when PB/DV IN in the SYSTEM (2/2) Menu screen is
set to PAL.
The user attempted to edit a tape recorded in the DVCAM format.
The user attempted editing in an audio combination that cannot be edited.
The user attempted time-code insert-editing during DV signal input.
This message is displayed when the REC button is pressed during playback
with the INPUT SELECT switch set to DV.
(EE check is not allowed during DV input.)
This message is displayed when an operation button is pressed with OPERA-
TION LOCK enabled. To enable OPERATION LOCK, set OPERATION LOCK in
the SYSTEM (2/2) Menu screen to ON.
DV6000U_02-027_Eng.p65e 06/03/03, 11:39 PM 25