JVC CA-V908T - Manual (Page 10)

6
English
Now you can plug the AC power cord into the wall outlet, and your System is
at your command!
VCR or other equipment
You can connect the following equipment to this System.
•
TV with a video input jack: used as a monitor of video CD playback.
• Audio/Video equipment.
Note :
• Connect the VIDEO OUT jack at the back panel of the System to the video input jack on the TV via
the supplied video cord.
• Connect the AUX jacks to the audio input and output of Audio/Video equipment.
• The AUX OUT jacks will transmit audio signals from the selected TAPE, CD or TUNER, to the
connected equipment. No audio signal is produced at the AUX IN jacks.
To listen to this source, press AUX.
Connecting Auxiliary Equipment
STEREO RECEIVER MODEL NO. CA - V505T UNIT NO. CA-V505T AC 110/127/220/230 - 240V 50/60Hz 85W
RIGHT LEFT
RIGHT LEFT
AUX
SPEAKERS
CAUTION:
SPEAKER IMPEDANCE
6 ~ 16 OHMS.
VIDEO OUT
LINE VOLTS
220V 110V
230V
- 240V 127V
IN
OUT
WARNING : SHOCK HAZARD-DO NOT OPEN
AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
VIDEO
OUT
RIGHT LEFT
AUX
IN
OUT
Auxiliary Equipment
To audio input
To audio output
TV
To video input
EN01-13.CA-V908T[U]/f 98.7.22, 8:03 PM 6