JBL SUB12 - Manual (Page 7)

7
SPECIFICATIONS
SUB12
Frequency Response 25Hz – 150Hz
Amplifier RMS Power 250 Watts
Amplifier Peak Dynamic Power † 500 Watts
Crossover Frequency 50Hz – 150Hz
24dB/octave, continuously variable
Driver 12" (300mm) PolyPlas ™
Dimensions (H x W x D) 19-3/4" x 14-3/8" x 18"
(with grille) (502mm x 365mm x 457mm)
Weight 39.5 lb (18kg)
† The Peak Dynamic Power is measured by recording the highest center-to-peak voltage
measured across the output of a resistive load equal to minimum impedance of the trans-
ducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.
Venue Sub OM 1/27/06 9:26 AM Page 9