John Lewis JLFZW1812 - Manual (Page 18)

A
e
f
A
3. Remove the door.
4. Unscrew the pin (f) of the bottom hinge
and install it on the opposite side.
5. Unscrew the pin of the upper hinge and
install it on the opposite side.
6. Install the door in the upper hinge.
7. Install the ventilation grille, clipping it
into place.
8. Unscrew the handle. Remove the plug
with a punch. Install the handle and the
plug on opposite side. Take from the
accessory bag the two plugs and cover
the holes left open after having
removed the handle.
9. Make sure that the front board of the
door is parallel to the front board of the
top.
10. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural
fitting of the gasket.
Repairs-After Sales Service
If the unlikely event of your appliance
requiring service, or if you wish to purchase
spare parts, please contact our extended
warranty administrators by telephoning: 0870 010 7887
They will give you details of your local
Service Force Centre.
18