Important for laser products, English, How to reset your unit – JVC GET0471-001A User Manual

Page 2: How to forcibly eject a disc

Advertising
background image

2

ENGLISH

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to

qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical

instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

How to reset your unit

Your preset adjustments will also be erased.

How to forcibly eject a disc

Be careful not to drop the disc when it ejects.
If this does not work, reset your unit.

WARNINGS:
To prevent accidents and damage

• DO NOT install any unit in locations where;

– it may obstruct the steering wheel and

gearshift lever operations.

– it may obstruct the operation of safety

devices such as air bags.

– it may obstruct visibility.

• DO NOT operate the unit while driving.
• If you need to operate the unit while

driving, be sure to look ahead carefully.

• The driver must not watch the monitor

while driving.

If the parking brake is not engaged,

“PARKING” flashes on the display, and
no playback picture will be shown on the
monitor.
– This warning appears only when the

parking brake wire is connected to the
parking brake system built in the car
(refer to the Installation/Connection
Manual).

[European Union only]

EN02-07_SV3305_007A_f.indd 2

EN02-07_SV3305_007A_f.indd 2

1/15/07 11:13:51 AM

1/15/07 11:13:51 AM

Advertising