Sanyo PJ-NET ORGANIZER POA-PN10 - Manual (Page 59)

59
Network Unit
OWNER’S MANUAL
ENGLISH
Serial port setting
*1 This product will restart automatically when the “Port” or “Serial Control” is changed and it
takes about 40 seconds.
*2 The reserved port numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is
reserved to control the projector through the LAN port.
✐ Exclusive driver software for control of the external equipment is required. This product does
not provide any driver software. Please consult your local dealer.
✐ There are 2 types of RS-232C serial cable, Normal and Reverse type. Usually, when connect-
ing between this product and a projector or a computer, use Reverse type of serial cable.
When connecting DVD player etc., use Normal type.
Setting to control the equipment connected to the serial port
from the computer
Serial Control :Selects “External”
Port :Sets according to the com-
puter specified port no. Do
not use port no. 10000*
2 .
Other Settings :Sets according to the com-
munication condition of the
equipment
Setting to control the projector from the serial controller con-
nected to the serial port
Serial Control :Selects “Projector”
Port :Not specified. Do not use
port no. 10000* 2 .
Other Settings :Sets according to the com-
munication condition of
the serial controller
Setting to control the projector from the computer through the
LAN port
Serial Control :Not specified
Port :Not specified
Other Settings :Not specified
* The port no. of the computer must be used with 10000.