Sony CDP-XA30ES - Manual (Page 17)

Recording From CDs
17 EN
Recording Your Own
Programme
You can record the programme you’ve created on a
tape, DAT or MD. The programme can contain up to 24
tracks.
By inserting a pause during programming, you can
divide the programme into two for recording on both
sides of a tape.
1 Create your programme (for side A when
recording on a tape) while checking the total
playing time indicated in the display.
See “Creating Your Own Programme” on page 14.
2
When you record on both sides of the tape, press
∏ to insert a pause.
The “P” indication appears in the display and the
playing time is reset to “0.00.”
When you record on one side of the tape or on a
DAT or MD, skip this step and go to Step 4.
A pause is counted as one track
You can programme up to 23 tracks when you insert a
pause.
3
Repeat Step 1 to create the programme for side B.
4 Start recording on the deck and then press · on
the player.
When you record on both sides of the tape, the
player pauses at the end of the programme for side
A.
5
When you record on side B, reverse the tape and
press
· or ∏ on the player to resume playing.
To check and change your programme
See pages 15 and 16.
“SIDE-A” appears while checking the programme for
side A and “SIDE-B” while checking the programme for
side B.
You can automatically insert a blank space of 3
seconds between each track
Use the Auto Space function (see page 21).
CDP-XA50ES
∏ ·
CDP-XA30ES
∏ ·
PLAY MODE
PLAY MODE
Recording From CDs
CHECK
CLEAR
≠ AMS ±
CHECK
CLEAR
≠ AMS ±
CONTINUE PROGRAM
Number
buttons
>10
P
=/+
CLEAR
CHECK
·