Sony HT-SS100 - Manual (Page 42)

42 GB
5
Press or b.
A preset number appears in the display.
6
Press V/v repeatedly to select
the preset number you want.
You can select the preset number directly
by pressing the numeric buttons.
7
Press .
“COMPLETE” appears in the display and
the station is stored.
8
Press MENU/HOME.
9
Repeat 2 to 8 to store other
stations.
To change the preset number
Restart from step 3.
1
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Press PRESET + or PRESET –
repeatedly to select the preset
station you want.
Each time you press the button, the
receiver tunes in one preset station.
You can also press the numeric buttons to
select the preset station you want. Then,
press
to enter the selection.
You can enter a name for preset stations.
These names (for example, “XYZ”) appear in
the display when a station is selected.
Note that no more than one name can be
entered for each preset station.
1
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Press PRESET + or PRESET –
repeatedly to select the preset
station you want to create an
index name for.
3
Press MENU/HOME.
4
Press V/v repeatedly to select
“NAME IN”.
5
Press .
6
Create a name by using
V/v/B/b.
Press V/v repeatedly to select a character,
then press b to move the cursor to the
next position. Letters, numbers and other
symbols can be input for a radio station
name.
If you enter a wrong character
Press B/b repeatedly until the character to
be changed flashes, then press V/v
repeatedly to select the desired character.
To erase the character, press
B/b
repeatedly until the character to be erased
flashes, then press CLEAR.
7
Press .
“COMPLETE” appears in the display and
the station name is stored.
8
Press MENU/HOME.
Tuning to preset stations
Naming preset station