Controls&function1 – Soundstream Technologies XXX-15000D User Manual
Page 8
Advertising
LPF
35Hz 250Hz
5.LPF Control
6.Remote Control input
The Bass EQ control is used to select the boost frequency. Any frequency from 40 to 120 Hz can be
selected. The Bass Boost control will increase the frequency selected from the Bass EQ up to 18dB.
This control is used to set desired low pass frequency[35 ~ 250Hz]
The filter acts to cut-off frequencies above the set-point.
The Remote input can be connected to the Remote Dash Control with the supplied connection cable.
This control can be used to adjust the amplifier's input sensitivity.
4.Bass Boost & EQ Control
40Hz 120Hz
7
Advertising