Siemens CCMX1315-LP - Manual (Page 55)

Utility program application
55
Siemens Building Technologies
Fire Safety & Security Products 01.2009
8 Utility program application
8.1 NAS player setup
Playing back NAS file
This application is found on the C D included in the delivery.
1. Execute NAS record setup first.
2. Click on the cross cursor button and choose the path of the NAS file to be
played.
3. Click on the Play button.
4. Click on the Stop button.
8.2 Audio record setup
This application is found on the C D included in the delivery. You can record a new
voice file, then upload it to the network camera. It can make an alarm out event.
After you finish audio record, please perform alarm audio setting.
Perform audio recording in the following sequence
1. Execute audio record setup first.
2. Click on the cross cursor button and choose the path where you want to save
the *.wav file.
3. Install a speaker before you start recording your voice.
4. Click on red button and start recording your voice.
5. Click on Stop button.
Î Recording is now finished.