Siemens CCMX1315-LP - Manual (Page 6)

Safety
6
Siemens Building Technologies
Fire Safety & Security Products 01.2009
1 Safety
1.1 Target readers
The instructions in this document are designed only for the following target
readers:
Target readers Qualification Activity Condition of the
product
Operational startup
personnel Technical training for
building or electrical
installations.
Training on the product
is recommended. Puts the product into
operation for the first
time, or changes the
existing configuration. The product is installed
but not yet configured,
or the existing
configuration is to be
changed.
1.2 General safety precautions
z Read the general safety precautions before installing, configuring and operating
the device.
z Keep this document for reference.
z Always pass this document on together with the product.
z Please also take into account any additional country-specific, local safety
standards or regulations concerning project planning, operation and disposal of
the product.
z Follow all warnings and instructions marked on the device.
Liability claim
z Do not make any changes or modifications to the device unless they have been
approved by the manufacturer.
z Use only spare parts and accessories that have been approved by the
manufacturer.
1.2.1 Transport
Damage during transport
z Keep the packaging material for future transportation.
z Do not expose the device to mechanical vibrations or shocks.
1.2.2 Installation
z It is recommended that all preparatory work (e.g. fitting of accessories) be
carried out in a workshop prior to final installation.
Radio interference with other devices in the environment
z When handling modules that are susceptible to electrostatic discharge, please
observe the ESD guidelines.