Sanyo PLC-WXU30 - Manual (Page 29)

9
Basic Operation
black out ➜ the captured image ➜ normal ➜
• • • • •
Press the NO SHOW button on the remote control to black out
the image. To restore to normal, press the NO SHOW button
again or press any other button. When a projected image is
captured and set as “User” in the Logo selection (see page 49),
the screen changes each time you press the NO SHOW button
as follows.
NO SHOW button
Press the P-TIMER button on the remote control. The P-Timer
display “00:00” appears on the screen and the countdown
starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.
P-TIMER button
Press the IMAGE button on the remote control to select a
desired image mode of the screen. See pages 36, 43 for
details.
IMAGE button
“No show” disappears after 4 seconds.
P-Timer display
✔ Note:
• See the previous page for the description of
other buttons.
IMAGE button
NO SHOW button
P-TIMER button