Seiko Instruments V-64S - Manual (Page 6)

44
White lines
pattern
1
Cause
The media advance is not properly adjusted.
Solution Solution Depending on the situation, perform a combination of the solutions below.
Change the pressure force using the Pressure roller up/down lever.
( P.2-34 How to switch the pressure)
Print the image and adjust the media advance value.
( P.4-32 Change during online printing)
HINT
Apply this solution when white lines appear at the same position on each of the six
color stripes printed at the edge of the media. If the white lines appear only on
one of these color stripes, apply the solution for White lines pattern 2.
–
White lines on the print..."
White lines
pattern 1" 
White lines
Pattern 1
White lines
Pattern 2